Just a sneak peek at the next project

Status
Not open for further replies.

Lasonic TRC-920

Moderator
Cpl-Chronic said:
Thanx everyone!! :-D I still have a lot of work to do for this mod to finish. You may have noticed, it's in the testing phase before I set up the controls & remote sensors, etc. I'm still deciding on the final placement of everything to make it unique from the rest....

I'm on the hunt for some 8" boombox woofers with a 2.2 - 2.6 OHM range. If anyone has a line on good woofs, let me know...

Stay tuned....

Cpl
Interesting! :-D
 

Cpl-Chronic

Member (SA)
Thanx caution :-D :-D :-D

I'm working on some ideas for the woofer section & have to modify the controllers, wire & mount the remote sensors & sensitivity knobs, add the remaining LED sections, ground the foil shielding around the audio circuits, add custom bars for added stability & test the whole smack....


Test video coming soon....

Cpl
 

Cpl-Chronic

Member (SA)
I'm switching it up a bit from the original configuration.....would appreciate feedback about the changes if anyone has something to add..


Stay tuned for a demo vid coming soon...

Cpl
 

Cpl-Chronic

Member (SA)
BoomboxLover48 said:
Far left 3 LEDs on the left speaker in pic are not lighting....is it my eyes or the bourbon i had??
... :-D :lol:
No...I haven't done the LEDs on that woofer yet....I did a video of it to compare the 2 sides for feedback if anyone had ideas or comments on it....
 

Cpl-Chronic

Member (SA)
Well, after mulling over the grills & watching the videos back & forth between the white tweeter grills & black I decided to goo all white on the 4 grills & see how that looks. I wasn't happy with the results after blacking the outside surfaces....the tweeters looked cooler, fresher with white & the tweeter & LEDs were hidden until they flashed or lit up....

I want that for the woofers too so I'm going back to the drawing board...

Stay tuned....

Cpl
 

SLO

Member (SA)
Lookin dope! I'd love to take one of your creations out on Hollywood Blvd at night and just freak people out :thumbsup: Another sweet Cpl creation :-D
 

Cpl-Chronic

Member (SA)
Thanx for the good vibes...got to wire & mount the sensitivity knobs & Remote 'eye' sensors, refine the wiring routing, ground the foil shielding, fit it all back together & test the shiznickle-fritz out of it before I call it done....


Stay tuned...

Cpl
 
Status
Not open for further replies.