Latest activity
-
caution replied to the thread 3d80e quiet line in problem.Make sure you hit all the switches with contact cleaner, especially the play/record switch and mode switch. -
I was spending that kind of money I would pay extra for the countach . -
That's wax, and it's there to avoid microphonics (electrical changes from vibration) in the VCO circuit -
SHi all, Bought a 3d80e recently, was a little less working and tattier that advertised but wanted to persevere. It has cleaned up...
-
I have one as well. Not very common in the US. The sound is smooth and spatial. Very nice boombox. -
jays replied to the thread M90 speaker issue.I didnt think of that, but yes both metter are working. il be pulling the headphone jack appart tomorrow but I really doubt I will find... -
floyd replied to the thread M90 speaker issue.Are the vu meters working right? The only reason I ask is because is if one meter is not working right it would be a sign there was a... -
jays replied to the thread M90 speaker issue.on my side speaker have already been tested but the sound from the headphone jack is really dim I have deoxit it probably 10 time I...
-
haha :-P peters wimpy unit is only 100 watts :thumbsdown: :dunce: :'-( :lol: any serious collectors knows that the 1, 000 watt...
-
I had a very similar Fisher but with a CD player on top. It was a real early portable cd unit. That thing used to skip like a S.O.B...
-
floyd replied to the thread YouTube Videos.I was spending that kind of money I would pay extra for the countach .
-
floyd replied to the thread M90 speaker issue.It's very rare for the m90 speakers to fail but I would check the speakers first before anything just to be sure.
-
jays replied to the thread M90 speaker issue.did you find your issue im kind of having the same problem! but even with the headphone jack fully cleaned, the external jack also clean...
-
KKirill1012 replied to the thread Sharp GF555 one channel distortion signal when cold.Thank you !!!
-
Superduper replied to the thread Sharp GF555 one channel distortion signal when cold.Like I said, you might be freezing the wrong parts. Here is a video showing troubleshooting of distortion in one channel. Note that at...
