Finally some success with it! Iv sweated all the joints on the function switch and it's better but still not totally there so I'll still be taking it off for a proper clean.
I have replaced the earlier mentiond connections from potentiometer board to main board with some standard 2mm copper wire thats insulated, but sadly still only half controll on the main vol it's stuck at 50% and I can only go louder
Think the graphite on those potentiometers has worn through so I'm probably going to have to replace them.
Anyone got schematics to see if the record ones are the same resistance? Could easily just swap them over then.
I have replaced the earlier mentiond connections from potentiometer board to main board with some standard 2mm copper wire thats insulated, but sadly still only half controll on the main vol it's stuck at 50% and I can only go louder
Think the graphite on those potentiometers has worn through so I'm probably going to have to replace them.
Anyone got schematics to see if the record ones are the same resistance? Could easily just swap them over then.