shelltoe113 said:Thanx and heres a quick list
1. Led shot
2. Static whenever you adjust any sound related knob *Potentiometer may neede cleaning replacing* did I spell that right..lol
3. Loudness button not working. Engages fine but no change in sound.
4. Distortion in sound...Plays pretty good but somethings not quite there
5. Power Loss..Low end bass and overall BOOM not there.
1) Could be a loose wire or broken solder joint
2) You will need to open the box to get access to the controls in order to spray them with DeOxit or some sort of contact cleaner. There are tiny holes just big enough for the spray straw to fit it. Do that for all buttons and knob controls. Do not flood the controls with cleaner though. A quick shot of cleaner then work the switch a few times. Repeat as needed.
3) See #2
4) See #2 for possible fix
5) If you are talking about AC power, check the power board inside the box. I know from experience that the boards break loose sometimes and might pull a wire loose. If you are talking about music or sound power, go with #2 and see what happens.