Belt Sizes - Post known belt sizes for your boxes here!

Status
Not open for further replies.

Fatdog

Well-Known Member
Staff member
I tried on a Win 3.11 and a Win 95 to run the software on the site to no avail.

However, on looking at all the files the one with a LOT of belt references with exact codes of ones needed in it is this PDF which is 4.1mb:-

Yikes!!!!! Did someone say belts????

So awesome find jaetee thanks a lot..
I just found out after ordering some belts for a bunch of my bbx's that some of the sizes are wrong :sad: I had ordered belts for two of my sounddesign boxes and the sizes were way off :sad: Some are good sizes though but if you can measure its probably better :thumbsup:Hey Bill, are you sure you were in the cassette player section? They also list VCRs, car stereos, CD players, etc. It's easy to get lost in there.
 

baddboybill

Boomus Fidelis
Yep ;-) I double checked after I got them and tried to put them in. The one belt said 5.2 and it is around 8-9 :sad: I did order extra and was able to get it working :w00t:
 

Ghettoboom767

Member (SA)
Hi bill,are the sizes for the GF-9191 correct? Assuming you
Used the 9090 belts.
Let me know as I want new belts for my 9191.
Thanks-Jeff. :-)
 

baddboybill

Boomus Fidelis
Hi bill,are the sizes for the GF-9191 correct? Assuming you
Used the 9090 belts.
Let me know as I want new belts for my 9191.
Thanks-Jeff. :-)
Yep :thumbsup:
 

Sazeus

Member (SA)
What about the cartridge tracking belt for the VZ 2000? Anyone know what size that is? Or do I need 2?
Thanks, don't want to open it up til I get em.

Sean
 

Fatdog

Well-Known Member
Staff member
What about the cartridge tracking belt for the VZ 2000? Anyone know what size that is? Or do I need 2?
Thanks, don't want to open it up til I get em.

Sean
Welcome aboard, Sean. Your best bet for all things VZ related is to go here:

viewforum.php?f=49
 

dooleywomack

Member (SA)
I am brand new here, I picked up a Sanyo M9923 for $2 and am trying to fix it up.
Everything works great except the cassette belts of course, I have never replaced these before and am frankly not a very "handy" person, can anyone point me to the right sizes? Thanks!
 

JustCruisin

Member (SA)
My service manual says the belt part number is 4H 358 30223, now how do I convert that to ordering info so I know which belt to buy??
 

baddboybill

Boomus Fidelis
My service manual says the belt part number is 4H 358 30223, now how do I convert that to ordering info so I know which belt to buy??


Most likely you can't and you need to measure old belt ;-)
 

baddboybill

Boomus Fidelis
Ok, thanks.. It looks to be a flat belt, I'll have to measure it once I get the unit.. :-)


What unit is it? Did you check the Rusiland PRB belts list?
 

nikonfoo

Requiem Æternam
Need belt sizes for Sharp GF-6060

checked the PRB belts list but only lists 2 belts
FRX9.7
SCX8.4

I think there are 3 belts maybe they have left out the counter belt
anyone know I think the deck is also the same as the Sharp GF 5656
edit the more i look i think they have left out the shorter one on the wheel under the Capstan
and im thinking its a SCX5.1
can anyone confirm
:bow:
 

nikonfoo

Requiem Æternam
ok no answer :sad:
so I hope this helps someone looking for the same belts
i tried to work it out with a similar deck
I have sent these belts to a friend and if all works
and will update this works out
Its a very nice chrome sharp and one day would like to get one too
so the data would be usfull
 

crazygamer

Member (SA)
nikonfoo said:
ok no answer :sad:
so I hope this helps someone looking for the same belts
i tried to work it out with a similar deck
I have sent these belts to a friend and if all works
and will update this works out
Its a very nice chrome sharp and one day would like to get one too
so the data would be usfull
I have the same BBx, sadly i don´t remember the measurements, i usually measure them with my own bare eyes, so far has worked good, sometimes small adjustment needed but works out. As i remember right, GF-6060 runs on 3 belts, 1 on the back, flat belt and one top square belt and counter belt in the front. :yes:
 
Status
Not open for further replies.