Thanks Reno, I’ve been using it already.
The 2 resistors seem to be ok, I guess I need to see if I can figure out how to test x302.
The 2 resistors seem to be ok, I guess I need to see if I can figure out how to test x302.
In this current climate I won’t be doing anything because of all the uncertainty.Rimmer36 said:Dave are you still up for buying boxes lol
1. Not that I know of. You must not be understanding how MPUs work. Because if the set is stalled because the microcomputer(s) lost their clock signal, there is no single jumper is going to reboot the system(s). Each MPU might have a reset pin. If that's the case, you might be able to pull that pin high or low (depending on what the datasheet says), which might be able to reset it but it will only work if the oscillator is putting out the clock signal.docs said:Norm, Is there any way to test the circuit with a jumper or such to see if the unit works in this instance?
Checked my dmm, it has a 2M and 200m ohm option.