I agree, gonna be stripping mine down for cleanup and these are easiest to read instructions I've ever seen
Sent from my iPhone using Tapatalk
bill remember one thing before re assemble remove the power switch that's mounted inside the lp door and let it hang loose until the halves are back together ,otherwise its very easy to break mounting tabs on the switch lever mounted to the front of the box when trying to line everything back up they bind and break off so easy.,once you got it together you can just screw the switch back in place .
also alignment of the phono/headphone jack board is very crucial and a pita to line the board up with the front case.
and before you pull it apart too far you have to disconnect both speaker plugs from the cabinets , these wires tend to break off because they are so small..