Unisef SZ5000 SS found on a dumpster...

Status
Not open for further replies.
hardmen

hardmen

Member (SA)
Nothing works, without a Trafo inside, without most of rear screws, missing tapedoor, some knobs and buttons, antenas are not originals (and broken) but nothing broken on plastics... ...all that I want for a customization... :w00t:

Here a video testing the woofers without tweeters yet, the customization it´s from another amp (this one drains batteries too fast).!!

[youtube]AeaHDNAXjmE[/youtube]

Next time, I put some pictures!!! ;-)

Cheers.
 
hardmen

hardmen

Member (SA)
It´s in this cleaning condition now, because i lost some time with him in the shower (deep cleaning and polish with wax).
I do not make some pictures about cleaning, because my wife no like my radios, so I not have many pictires of these steps.

Cheers.
 
hardmen

hardmen

Member (SA)
Here, a video that I make with all modifications... ..plays real loud and with quality.

The three knobs now are Volume, Bass and Treble.

[youtube]WUZgKNfYxKI[/youtube]

Cheers.
 
Fatdog

Fatdog

Well-Known Member
Staff member
Whoa! :w00t: Are you bypassing the original amp or using both of them? I like how you made the knobs work for the Bass and Treble. :cool: Does the EQ still work?
 
hardmen

hardmen

Member (SA)
Fatdog said:
Whoa! :w00t: Are you bypassing the original amp or using both of them? I like how you made the knobs work for the Bass and Treble. :cool: Does the EQ still work?
Click to expand...

Bobby.

The only things working now in this one is the Power Button and the Pots (Bass, Treble and Volume), all the rest nothin works (the LED meter PCB appears to be ok, but I don´t know how I make to connect with the new amp... :huh: :huh:

When I found him, nothing works (broken and toasted PCB, without power Transformer, without the knobs of Balance and REC level, without screws...)
But since I make the modding on my Conion Case I realized it´s that mod is possible with many other boomers, then I think, why not for this???

The amp costs $17,91 from China and the only thing I make, it´s disassemble the pots and power button, put colored wires in de amp and wires to moving the pots and power button around the box, increase the size of MP3 player wires to put this one in the best local and "voilá", the thing happen!!!

The amp is the same I use in the Conion case project (video Below).

[youtube]vLvo4C1mgu0[/youtube]

Here, the work on the new MP3 player mak for this boomer:

Mark the plastic with the original aliminum mask:

324889_342692345813068_1951444426_o.jpg


Make holes with my screwdriver

462056_342708275811475_493508590_o.jpg


Cuttoff the non usable parts:

256332_342708439144792_1892339043_o.jpg


The plastic after sanded work:

202011_342708705811432_3051599_o.jpg


With the MP3 player attached:

191225_342708962478073_1438452164_o.jpg


The mask with a chrome tape for better looks:

411484_342709359144700_666416935_o.jpg


And the Blaster, ready for war (any war)... :yes:

202002_342874972461472_898190058_o.jpg


Cheers.
 
hardmen

hardmen

Member (SA)
cindy said:
Nice work! You should install a led spectrum analyzer in that cassette bay!
Click to expand...

No Cindy, in there I will make a plate to attach my mobile and plays some MP3 with a Cassette MP3 software like this:

[youtube]bM_o7XMECM0[/youtube]

Cheers.
 
Status
Not open for further replies.
Top Bottom