SHARP VZ-2000 LP record 's problem

[Funkateer38]

Hi all

Being restored a SHARP VZ-2000 and I'm blocking.

The radio is working.
The cassette player is working.

But when I select the LP record part, the solenoids A and B will boot up and shunt it down. I notice that the EP/LP LEDs are off.

Any ideas?

In advance, thank you

 

[floyd]

I would check the auto select switch inside the lp door also make sure this unit is standing upright because it won't play records if the switch in the foot is not pressed in.

 

[BoomboxLover48]

Floyd is right! If you lay down with record door facing up, it will not work! I learned it the hard way!

 

[Funkateer38]

Thanks Funkateers,

I set up the LP record.
Now just rewind and forward works.

But EP/LP LEDs are still off. Whatever the selection mode

Best regards

 

[Funkateer38]

Finally, LP record works,

It was one of two big springs in wrong position.

My last problem :

The LEDs of selection play, Cut, rewind, .... are still switch off