Sharp VZ 2000 Belts - Stylus

[Stuzy]

Hi Guys

Thanks for the info regards stripping down above box.

I am lucky enough to have a couple, want to purchase 2 complete set of belts - stylus and replace.

Can anyone give advice where to purchase from please

 

[Fatdog]

You can download the service manual here:

http://www.mediafire.com/file/mzx0thu1jeh/Sharp+VZ-2000+SM.pdf

The stylus is listed in the manual as STY-123, but is just an AKA of the Audio Technica ATN-3601.

There is a section in the Tech Talk section devoted to the VZ units. Check that for more.

https://boomboxery.com/forum/index.php/forum/41-sharp-vz-2000-2500-3000-3500/


Belts might have to be sourced from multiple vendors. A lot of times, the turntable belt is the odd one out.

 

[caution]

If I remember correctly, the VZ-2500 uses the same belts as the VZ-2000

Actually they are different.

Tape deck:
Playback: SCQ6.0 (SBS6.0)
Flywheel: FRX11.5 (FBM11.5)

Turntable:
Platter: FRX25.0 (FBM25.0)
Gear: SCX4.0 (SBS4.0)

 

[Fatdog]

Thanks, Eric!

 

[Stuzy]

Thanks Guys, will let you know where i source from, a friend has said to try CPC

 

[nikonfoo]

I have them but if you can find closer to home and cheaper better
CPC are good I have bought from them pinch rollers before
and yes those are the correct sizes from caution for the 2000
more money more beer

 

[Stuzy]

Thanks Geoff, will PM you