PANASONIC RX-5085 DOOR/BUTTON/SPRING PLACEMENT FOR REASSEMBLY

[NationalPanasonic]

I totally bungled the disassembly for a rough 5085 I picked up and the keys have these springs attached at the bottom. I wasn't paying enough attention and can't figure out where they go to and how to put the door/key piece back together. They are different sizes across, it looks like the first 3 attach to the small black tabs on the end of the mechanism part but the other 3 are too long and need to activate the play/pause/stop mech. Any help would be appreciated. I think I broke some plastic on the door but at this point I just want the unit to function. My Rx-5050s are so much easier to work on...

 

[BoomboxLover48]

All the buttons should look like the same type in figure 12.
M6 axle hold all those buttons in place,
Springs must be attached so that it returns to original position after you disengage it.
So, they go to the other end of the front face of the button like how it is in your picture.
The last three springs were pulled out of shape.
Now you need to get 3 springs of the same size and tension like on the other buttons.
If you are in US, try ACE hardware and they might have small springs like that.


if

 

[BoomboxLover48]