Need Help - Looking for mint GF-777

Status
Not open for further replies.

roddy@radiohier

Member (SA)
Hey Guys,

I've got a customer looking for a mint GF-777. I know its almost impossible to find, but I thought maybe one of you guys
might have one to sell, or know of one somewhere. It doesn't have to work, just the exterior has to be imaculate. The customer is prepared to pay for that.

Would be great if anyone could help out.

Cheers. Roddy
 

Fatdog

Well-Known Member
Staff member
I won't think it's impossible, but it is indeed a challenge. Good luck with the search, Roddy. :-)
 

eldorado

Member (SA)
roddy@radiohier said:
Hey Guys,

I've got a customer looking for a mint GF-777. I know its almost impossible to find, but I thought maybe one of you guys
might have one to sell, or know of one somewhere. It doesn't have to work, just the exterior has to be imaculate. The customer is prepared to pay for that.

Would be great if anyone could help out.

Cheers. Roddy

hello rod,

theres a guy on ebay , very known by the folks here,

that has some from time to time...

here goes:

http://cgi.ebay.com/Vintage-SHARP-GF-77 ... 19b87df026

maybe you wnt a local one of from the guys at the forum,

but here you have it.
 

roddy@radiohier

Member (SA)
Yeh I've seen this guy before...don't know if I trust his judgement though...he says there's a few minor scratches etc.
We've got a few in this condition..but its still not good enough for a russian customer with money.
Thanx anyway
 

MasterBlaster84

Boomus Fidelis
Roddy your right about the chinese seller, not trustworthy enough to gamble on a minty unit. Given enough time I expect you'll find one, there are enough of these 777's floating around that there has to be a minty one for sale eventually.
 

JVC838

Member (SA)
Hi Roddy,

Ich habe ein 777Z, welcher optisch ein einem sehr guten Zustand ist, aber leider nicht wirklich ohne jeglichen Makel: Ganz leichte Kratzer auf der Oberseite, das linke Seitenteil hat unten ein etwas stärkeren Kratzer, der auf ca 5mm länge bis auf das Kunstoffmateriel durchgeht. Sonst sind optisch an 2 Kanten kleine, leichte Kollisonsspuren erkennbar.
Technisch arbeitet das FM-Teil nicht korrekt.

Sorry for my German Posting, but so I can discribe the condition better...
 

Superduper

Moderator
Staff member
yeah, what he said, to wit:

German to English translation-
I have a 777Z, which is visually in very good condition, but unfortunately, not entirely mint: Very slight scratches on the top, down the left side panel has a slightly stronger scratches, the length of about 5mm up passes on the Kunstoffmateriel. Otherwise, 2 edges are visually recognizable by small, light Kollisonsspuren.
Technically, the FM part is not working properly.
 

Ghettoboom767

Member (SA)
Hi Roddy@radiohier-There is one member who HAS a mint one-Eddy has a mint one-really.But I don't know if would sell it. :hmmm:
Mine is not mint but works 100%.Not in mint category.
Good-Luck-GB. :-)
 

roddy@radiohier

Member (SA)
Thanx alot for the feedback guys. JVC838 I'll send you a PM in the next few days. Maybe you can send me some pics.
We've got a couple that are pretty good in my terms but thats still not good enough for the guy. I already told him that it's a 25 year
old radio and that its going to be almost impossible to find one. Who knows, maybe he'll realize that if he does some research for himself.
Hey super where did you learn your german or did you bang it in google translater?

Maybe I'll send Eddy a PM too.

Till then. Roddy
 

MasterBlaster84

Boomus Fidelis
roddy@radiohier said:
I already told him that it's a 25 year old radio and that its going to be almost impossible to find one.

True words roddy, finding minty boxes takes great timing and a little as well as often a bag full of cash.
 

Eddy

Member (SA)
roddy@radiohier said:
Seems like cash is the least of his problems...still doesn't make it much easier though.
I'm just curious how much this guy wants to spend on a mint GF 777 :hmmm:
 

roddy@radiohier

Member (SA)
Hey Eddy, are you interested in selling your 777? I heard you have a pretty good one. Tried sending you a PM but no go.

Cheers. Roddy
 

Eddy

Member (SA)
roddy@radiohier said:
Hey Eddy, are you interested in selling your 777? I heard you have a pretty good one. Tried sending you a PM but no go.

Cheers. Roddy
Sorry Roddy , but i won't sell it.This one (in my avatar ) is like new
I'm shure i would regret selling it very soon altough the sound is crap :hmmm:
Good luck on finding one anyway :cool:
 

Eddy

Member (SA)
roddy@radiohier said:
Tried sending you a PM but no go.

Cheers. Roddy
:hmmm: Nicolle(walkgirl) tried to PM me too , didn't work for her either. Something wrong Bobby ?
 

roddy@radiohier

Member (SA)
Apparently you have blocked being able to receive PM's. Thats the message that comes up anyway.

No worries about the 777, I can understand.
 
Status
Not open for further replies.