Greetings from Canada!

Status
Not open for further replies.

serf2k

Member (SA)
Hi all,
Thanks for accepting my registration to your very informative site. I'm located near Hamilton, Ontario and have a Panasonic RX-5080 (actually two - one I bought new from an electronics shop in Troy, New York when I was 16, and the second "parts" one I just picked up on eBay), and I just picked up an RX-CT990 from Kijiji for $30. The 5080 developed a stuck tuner over the years and I have recently opened it up and using some needle nose pliers I was able to "adjust" (or "persuade"...perhaps?) the varicap to a favourite radio station before reassembling it. Hoping that the parts box will have a working tuner and I can swap the whole board into my old box. Initially the 990 worked well - used it in the garage and at the pool - but last night we went to the local drive-in for a quadruple bill night and used the box for the audio while we sat in front of the car. The box was powered by a 12v line from the car and in the midst of an action sequence of the first movie suddenly the bass cut out and it appears that the woofers both died - they won't pass any current. Strange. Ah well......more winter projects for me. Looking forward to discussions about these, and other boxes. In the meantime.....here is a picture of the boxes I took while cleaning out the car for the Drive-in....
10575133_10152688449125960_5610587294165653402_o.jpg
 

Beosystem10

Member (SA)
Welcome. Here's hoping that you enjoy being a member of this great forum. I like your taste in boomboxes and having heard one of the bi-amped Panasonics myself recently, I totally get why they're well respected. :thumbsup:
 

bill

Member (SA)
Drive in rock. Nice choice for a blaster . I usually take three when I go. Usually it's two Sanyo m9996 and a kaboom . Sometimes I switch it up and take others . I have owned a few of those biamped Panasonic boomers now. I gave three of them away . One to my landlord and a couple to other visitors. I like em still got one or two laying about
 
Status
Not open for further replies.