Do Not Touch
- Thread starter Reli
- Start date
- Status
Transistorized
Member (SA)
Northerner
Boomus Fidelis
metalhandbag
Member (SA)
BoomboxLover48
Boomus Fidelis
Record must be a Virgin! Like a Virgin! 
For fact my CFS 88 needs new belts so I put a label not to press record button. Or else, I have to open the box and reset it.
For fact my CFS 88 needs new belts so I put a label not to press record button. Or else, I have to open the box and reset it.
ford93 said:
Hisrudeness
Member (SA)
Probably the result of some bad experience. Somebody pressed the record (instead of play) button during Christmas party and the owner lost his beloved Alvin & the Chipmunks recording!
JustCruisin
Member (SA)
trippy1313
Member (SA)
Lasonic TRC-920
Moderator
Grandma recorded over ol' Blue Eye's again!
My grandmother, who was born in 1917, used to accidentally press the button on her TV remote that would change the station off of channel 3 which had the cable box tuned to it, so she would loose all her cable stations. She had no grasp of any level of technology, like how the cable box worked, VCR's or the like. She could go up or down the channel selector for the cable box, but once she changed the TV channel off channel 3, she was DONE! Someone would have to drive over to her house and fix it (She was 75 miles away) and some times, it would be a week or even weeks before someone could get over there and she would be sitting there without TV, in an empty house. It was very sad. She asked her neighbor to fix it so many times that they stopped doing it.
So, I can understand the need for these label's.
"Grandma, stop pressing the record button, you recorded over your music again"....."I did what now?????" :hoveround: (**I love and miss you grandma**)
My grandmother, who was born in 1917, used to accidentally press the button on her TV remote that would change the station off of channel 3 which had the cable box tuned to it, so she would loose all her cable stations. She had no grasp of any level of technology, like how the cable box worked, VCR's or the like. She could go up or down the channel selector for the cable box, but once she changed the TV channel off channel 3, she was DONE! Someone would have to drive over to her house and fix it (She was 75 miles away) and some times, it would be a week or even weeks before someone could get over there and she would be sitting there without TV, in an empty house. It was very sad. She asked her neighbor to fix it so many times that they stopped doing it.
So, I can understand the need for these label's.
"Grandma, stop pressing the record button, you recorded over your music again"....."I did what now?????" :hoveround: (**I love and miss you grandma**)
ZacMac
Member (SA)
Hahahaha, I wonder if its just a dirty record slider? My record button has a silver sticker over it blanking it out, on my Panasonic RX-C100, If I push the button it messes up the stereo channels, makes cassettes play through one speaker, and the other functions it plays through one speaker much weaker, then if you fiddle a little with it, It goes away and never comes back unless you press that button, It came with the little silver sticker and I don't make cassettes with it, so I still haven't had the button cleaned, my cousin has become an electronic technician and I am going to have him fix it this summer, Maybe this box had a similar issue?
- Status