Cruising with the Conions...

Status
Not open for further replies.
JustCruisin

JustCruisin

Member (SA)
The sun made an appearance today, so I figured it was time to take some pics outside! All I have is trees around me, so I threw the Blasters in the backseat of my 75' Chevy and hit the town.. :-D
Also, this is the first photoshoot with my new C-126 that I just got from the homie Driptip yesterday... :yes:
I was surprised the C-126 seems to be crisper and clearer than my TC-999 even though it doesn't have the tiny tweeters..
I love these big square beasts! :-D
29pzv4k.jpg

2n68a61.jpg

9t03za.jpg

nfprau.jpg


Had to do my best Ladies Love Cool James pose... :lol:
2ldjc6d.jpg
ll_cool_j.jpg


In it's new home on my Ghettoblaster Shrine! :cool:
p7imw.jpg

16lhj7s.jpg
 
JustCruisin

JustCruisin

Member (SA)
I was gonna start a topic, but I'll just throw it in here.. Built a Ghettoblaster Shrine last weekend that I'm really proud of!
My buddy was cleaning up his shop and asked if I wanted his old shelf, I said "sure!" Took me about 2 seconds to decide what I was gonna use it for! :-D
It had thin metal rods that held up the flimsy & bent sheetmetal shelves, so that wasn't gonna cut it..
Also, my boxes are a lil bit longer than those shelves.. so time to do some cutting!
240wqxf.jpg


Cut out the gridwork on the sides and welded in some 3/4" angle iron.. Took very critical measurements to make sure all my Ghettoblasters would fit!
20trmnk.jpg


Picked up a half sheet of 1/2" Aspen? wood and cut the 14"x29" shelves, hit em with a couple coats of poly for a smooth finish..
ndtq3t.jpg


Sanded & primed the cage and sprayed it with some House of Kolor Snowwhite Pearl I had on the shelf..and cleared of course
2ppn8e0.jpg


I had drilled holes in each corner of the angle iron so the shelves could be screwed down, tying the whole shelving system together! The tabs on the top crossbar I welded on so I could bolt my car club plaque to display..
2diirt0.jpg


My Ghettoblaster Shrine! That I admire every night and every morning.. :-D With the angle iron and wood, I probably have $36 into it, but the 2 days I built it with no problems whatsoever is priceless! I still need to put a 6-socket surge protector on the backside of the 3rd shelf to plug them all into..
msox0i.jpg
 
JustCruisin

JustCruisin

Member (SA)
Brutus442 said:
Fatdog said:
Fresh!

That re-pose of the classic LL picture is nice. :cool:
Click to expand...


I agree Bobby! You just need a little more bling JustCruisin, cause you got the boxes!! :thumbsup: :thumbsup:

Nice shots!
Click to expand...

Ha! Yeah I left my gold rope chain at home... :-/ (you can see it hanging on the wall in one of the pics)
 
JustCruisin

JustCruisin

Member (SA)
Fatdog said:
Fresh!

That re-pose of the classic LL picture is nice. :cool:
Click to expand...

:-D Today just gave me a lil taste, can't wait for the snow to melt to get some great outdoor shots of my boxes this summer! :yes:
 
blu_fuz

blu_fuz

Well-Known Member
Staff member
That picture of you with both boxes by the brick wall is AWESOME!



The first pic makes the gray box look smaller! :-O


nice pics :breakdance:
 
THAFUZZ

THAFUZZ

Member (SA)
Those are great shots JC. Joe is right, I like the your Avatar pic. It's Funky-Fresh-Cold-Dope-ILLing'! :afro:
 
Status
Not open for further replies.
Top Bottom