Crown CSC 950f phono stage bypass

Status
Not open for further replies.

Sel The Don

Member (SA)
Hello all,

Instead of fannying about with adaptors I'm just going to bypass the phono stage as I want to connect an AUX input without having to press record on the tape.


The service manual is above, can anyone tell me where I need to cut and splice?

Thanks a lot
 

Sel The Don

Member (SA)
Hello mate,

I can't find one ready made anywhere so the best option for me will be to modify the circuit internally.
 

goodman

Member (SA)
You can bypass phono amp, but you must open the boombox case.
Look at this picture where must connect 3 cables:
Left - between R105 and C106;
Right - between R205 and C206;
Ground - to ground;
You can use RCA or 3.5 mm female mount jack.




LINE-INPUT.jpg
 
Last edited:

Sel The Don

Member (SA)
You can bypass phono amp, but you must open the boombox case.
Look at this picture where must connect 3 cables:
Left - between R105 and C106;
Right - between R205 and C206;
Ground - to ground;
You can use RCA or 3.5 mm female mount jack.

LINE-INPUT.jpg


Hey mate.

Thank you for the info but I can't see the picture, any chance you can reupload it?

Should be able to press Record only, not Record+Play

I gave it a try last night and there's like a echo effect when I play, it sounds really weird. I'll try the way Goodman is suggesting, if I get no joy I'll have to get my brother to send me an attenuated cable from the UK.
 

goodman

Member (SA)
Hello again.
Here is another picture to help you, to locate the right place for connect the new input.


LINE INPUT 2.jpg


When you finish, you can post pictures from this mod. Good-luck.
 
  • Like
Reactions: Sel The Don
Status
Not open for further replies.