Conion C-100ff Initial inspection

[Megablast_73]

Hi Gentlemen.I received a C-100ff. I'm a little worried because after initial inspection it turns out that some psycho dickhead has tampered with it.Torn out,removed the heatsink mount of the tuner board.I have no idea why.Doesn't work in stereo left channel when listening to the radio.Doesn't work pivoting VU indicators when listening to the radio and cassettes.When searching for radio stations the VU indicator reacts.Both decks somehow work reasonably. There was an attempt to repair something in the cassette door.Not good. A couple of holes in the case for the mounting screws are damaged. Overall everything looks good...I guess. Where to start here? Do you have any advice on what to watch out for ? What to pay special attention to ?

 

[caution]

Congrats! If you have a 3D printer I can give you an stl file for the broken/missing bits
The VU needles are working fine for radio mode, they're supposed to show how strong the radio signal is
If you want to see them dance to the music instead, try pressing record

 

[Megablast_73]

.

 

[Megablast_73]

Congrats! If you have a 3D printer I can give you an stl file for the broken/missing bits
The VU needles are working fine for radio mode, they're supposed to show how strong the radio signal is
If you want to see them dance to the music instead, try pressing record

Thanks! If I can't somehow manage to fix this door then I will have to look for someone with a 3D printer.Send me this stl file please.I am attaching a photo of the damaged component from my door. As for the VU meter.Did I understand correctly that in the C-100 these needles in addition to measuring the strength of the radio signal move while I listen to cassettes and sound from the Line-In only with the REC button on? Because LED meters work in every mode as they should.
And besides, looking at its sticker with the serial number of mine, they produced a lot of them

 

[Megablast_73]

Thanks! If I can't somehow manage to fix this door then I will have to look for someone with a 3D printer.Send me this stl file please.I am attaching a photo of the damaged component from my door. As for the VU meter.Did I understand correctly that in the C-100 these needles in addition to measuring the strength of the radio signal move while I listen to cassettes and sound from the Line-In only with the REC button on? Because LED meters work in every mode as they should.
And besides, looking at its sticker with the serial number of mine, they produced a lot of them

Ok, I already know that these VU meters should work in any mode. I don't know why I can't edit my posts.

 

[Megablast_73]

.

 

[Megablast_73]

Congrats! If you have a 3D printer I can give you an stl file for the broken/missing bits
The VU needles are working fine for radio mode, they're supposed to show how strong the radio signal is
If you want to see them dance to the music instead, try pressing record

Congrats! If you have a 3D printer I can give you an stl file for the broken/missing bits
The VU needles are working fine for radio mode, they're supposed to show how strong the radio signal is
If you want to see them dance to the music instead, try pressing record

Hello "caution". Unfortunately, I was not able to repair the damaged door element. Could you help me as you suggested and send me the file to the 3D printer so that I can create it? I personally don't have such a 3D printer, but I will use a company that does. I would like to take care of this as soon as possible. Thank you

 

[caution]

Before I send it, do you have the pair of springs that attach to it, or was it just floating freely?

 

[Megablast_73]

Before I send it, do you have the pair of springs that attach to it, or was it just floating freely?

View attachment 60100

I only have two such springs....

 

[caution]

The upper spring is the eject spring, it slips onto the right door hinge (see images)
You're missing one of the door springs. Check your PMs

 

[caution]

Unfortunately, your account is too new and you are not allowed to receive private messages yet.
I think you have to post a minimum number of messages to the forum.

 

[Megablast_73]

Unfortunately, your account is too new and you are not allowed to receive private messages yet.
I think you have to post a minimum number of messages to the forum.

Or maybe through Stereo2Go? I was more active there. My nickname there was Megablast73. Or maybe you can send it to my email?