Hi Everyone,
I recently got a Clairtone 7980 and found the Tape-1 not loading cassette correctly. Then I did some researches and found that a door insert is missing. I ordered a 3D printing replacement prod from https://www.shapeways.com/product/A...r-insert?key=71ad94ead90e0d5e90f1ccc445f6ba66
However, the 3D prod manufacturer told me I need 2 small torsion springs on each side of the bracket in order to work properly. From online store, I can see many kinds of mini torsion springs, but don't know which one to choose.
I attached the tape-1 door of mine as well as the pictures from network. Can anyone please advise the size/spec for these two springs?
Thanks and Happy holiday
I recently got a Clairtone 7980 and found the Tape-1 not loading cassette correctly. Then I did some researches and found that a door insert is missing. I ordered a 3D printing replacement prod from https://www.shapeways.com/product/A...r-insert?key=71ad94ead90e0d5e90f1ccc445f6ba66
However, the 3D prod manufacturer told me I need 2 small torsion springs on each side of the bracket in order to work properly. From online store, I can see many kinds of mini torsion springs, but don't know which one to choose.
I attached the tape-1 door of mine as well as the pictures from network. Can anyone please advise the size/spec for these two springs?
Thanks and Happy holiday
Attachments
-
142.6 KB Views: 8
-
99 KB Views: 8
-
57.5 KB Views: 9
-
301.9 KB Views: 8