panasonic

  1. hale2adam

    Panasonic RX-5010 tape deck heads not moving

    Hello all. I just found this website and recently found a Panasonic RX-5010 boombox in great condition. The seller shipped to me and the tape deck worked at that point, after shipment It no longer works and i am trying to diagnose the problem and fix from the expertise I find here. When the play...
  2. E

    national rx-cw55f belt size

    Hi, there anyone can help, I just need to know the size for the national rx-cw55f belt, for both side Thanks
  3. LaDoberman

    Wanted door cassette Panasonic RХ5600 (5400)

    Hello Wanted door cassette radio tape recorder Panasonic RХ5600 (suitable from 5400) I've been looking for a year, and almost despair Please help find it for your favorite tape recorder I would be grateful for any advice Shoot me a PM for shipping cost and I'll get right on it Thanks
  4. TechnicsDan82

    New home new livingroom/listening room ! also better pics of our Technics and Panasonic gear

    loving the amount of room we now have ! check it out guys & girls
  5. A

    National RX-C39

    Hello All, New member here. I recently scored an RX-C39 from someones trash and am looking to repair the unit myself. Both the play and record buttons are stuck and I'd like to fix this issue if possible. I'm having trouble opening the unit to inspect the interior and was looking for some...
  6. C

    Remote Issue with Panasonic RX-DT75

    Hi I have just acquired a Panasonic RX- DT75 that is in lovely condition. As is usual, it is without its original remote control, although all the buttons on the item work perfectly and I have original remotes for my RX- ED707 and RX-ED90, which operate many of the functions, but not the Cobra...
  7. Boombox80sJapan

    NATIONAL RX-5400 FOR SALE

    SELLING NATIONAL RX-5400 FROM JAPAN.PERFECT CONDITION! JUST ONE SMALL KNOB IS MISSING. https://www.ebay.co.uk/itm/124084177293
  8. jronyc

    Customized woofered Nat 5350

    Thought it would be cool to incorporate a "subwoofer" into an old school BB. I had a shot I mean shot 5350. After 3 days of soldering the 5350'a cracked board. Getting it to power up and the tape deck to work I finally gave up when I couldn't get sound out of it for the life of me! The board...
  9. ATCrider

    New Member First RX-5085 Looking For The Missing Knob

    Hello everyone, My Name is Zach and Im 22 years old. I've always been fascinated with 80s stuff. I have a collection of 80s honda three wheelers. I have been looking for a good boommbox for a little while and have gotten my first one. I got a very nice Panasonic RX-5085. It works great! it will...
  10. Reelcassette

    Original Ceramic Twееters VS Regular Dome, Piezo or Cone Tweeters - Do I need to Replace Them ?

    Original wires and Ceramic Tweeters of my RX-CT 900 New stylized tweeters installed into original tweeters nests Many boomboxes of 80's have a Ceramic Twееters. High impedance , narrow frequency range and very low output make them useless if we're talking about HQ sound. Try to disconnect...
  11. Reelcassette

    Modifying RX-CT980 has made a portable HI-FI

    A Hardwood bracing, Layer of adhesive thin pwc foam, Cotton and Layer of thick natural Wool + Discreet Tweeters were installed behind bass reflex ports into my RX-CT980 speakers Tape compartments covers were removed Capacitors for twitters are installed as well 4.4 PDS Bi-AMP System became...
  12. Reelcassette

    Modifying RX-CT900 speakers has made an incredibly deep bass (from 40 Hz)

    Installed are: Layer of pwc foam, layer of cotton , Cross wooden brace , calculated bass reflex and thick black/red wiring. Original tweeters were replaced with sensitive high output piezo tweeters. Decorative polished chrome rings added to finish bass reflex ports' edges. Wire organizers were...
  13. P

    More “Discman” Than “Walkman,” But ...

    Hello, people. It’s been a bit of time since since I posted any messages here on BoomBoxery.com. (Or on any ‘site, really. But that’s another story.) Anyway, now that a member like static2000g got us nice and started early in 2015 (though he hasn’t posted since September 2017), does...
  14. L

    Need belt for RX-5005

    Last year I picked up a 5005 at a garage sale for $5, and to my surprise it ran perfectly (the seller threw in another newer boombox, that wound up being junk, so really I got it for $2.50). It ran fine until a couple days ago when the belt snapped just after starting a tape. I checked Ebay and...
  15. yammi99

    My new Panasonic

    Last week I received a new boombox, that I caught at Yahoo Japan – the Panasonic RX-FW38. It was produced for Japanese market only and seems to be quite rare. Funny thing is, that all decals are in English. It works without problems with double auto reverse, just need a new arial. Sound is...
  16. canhhoabatdiet

    Panasonic RX 5600

    Hello. I own a Panasonic RX 5600 cassette in decent condition. You can share the feeling of sound quality of Panasonic RX 5600. Thanks very much
  17. Guitaraudiologist

    Dead motor, or am I missing something?

    Quick question. If I apply 12VDC directly to the terminals of the cassette motor, it should spin, right? Or am I missing something? I'm thinking I have a dead motor on my Panasonic RX-5150. If so, how hard are those motors to come by? I'm trying to decide whether to repair or just do some kind...
  18. P

    An "Egg" In Some Trouble

    My Panasonic RX-DT75 has run into some trouble. My efforts to get it to play a probably bootleg copy of the 1996 seasonal album This Is Christmas by Luther Vandross have* made a mess of its electronics. The laser pickup (or "focusing platform") is now somehow stuck. I hear a slight clicking...
  19. KeyserSoze

    Another Panasonic in Stranger Things.

    Hey, I spotted another Panasonic in Stranger Things season 2, this is a RX-5031, I think, it's only on screen for a fraction of a second. Great show, I love spotting all the retro equipment in it. :-)
  20. chuckulaa

    RX 5050 - Anyone have a schematic?

    Greetings, I recently acquired an rx 5050, and the channels aren't balanced. The right channel sounds great, but the left channel is weak. I want to get this bad boy running healthy again, but I can't find access to a schematic. Does anyone have a schematic for the rx 5050? I managed to...