Need conion C100 resistor info???

Status
Not open for further replies.

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
Need help to find out what the band colors are for this resistor as mine looks to have been blown then resoldered :'-( :thumbsdown: This is located on board for deck 1 for motor :-D


 

-GZ-

Member (SA)
Oct 8, 2010
2,238
7
38
Boom Central
hopefully the picture will help...hard to tell. id say orange green black gold(or green). if you tell me color options i could narrow it down


 

-GZ-

Member (SA)
Oct 8, 2010
2,238
7
38
Boom Central
first one...definitely orange

second.....olive green or gold

third----black or navy blue

fourth----gold or olive green

sorry man theyre old and faded and my eyes are playin tricks on me.....some daylight would help if i was ever home during daylight.
 

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
-GZ- said:
first one...definitely orange

second.....olive green or gold

third----black or navy blue

fourth----gold or olive green

sorry man theyre old and faded and my eyes are playin tricks on me.....some daylight would help if i was ever home during daylight.
I believe the 1st one you said was right...Thanks again.... :thumbsup: Also like i said about your extra wire, if am/fm tuner works just tape wire for future ;-)
 

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
Thanks guys, :thumbsup: :thumbsup: My resistor had been either burned or broken and someone rigged it by soldering it together....It works but of course I can not test it :sadno: GZ has been helping but the colors on his dont make sense so I have asked if he has a test meter to test his :hmmm: If anyone else has a conion/helix/clairtone this could be vital info ;-)
 

-GZ-

Member (SA)
Oct 8, 2010
2,238
7
38
Boom Central
baddboybill said:
Thanks guys, :thumbsup: :thumbsup: My resistor had been either burned or broken and someone rigged it by soldering it together....It works but of course I can not test it :sadno: GZ has been helping but the colors on his dont make sense so I have asked if he has a test meter to test his :hmmm: If anyone else has a conion/helix/clairtone this could be vital info ;-)
Sorry bill, don't have a meter.
 

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
-GZ- said:
baddboybill said:
Thanks guys, :thumbsup: :thumbsup: My resistor had been either burned or broken and
someone rigged it by soldering it together....It works but of course I can not test it :sadno: GZ has been helping but the colors on his dont make sense so I have asked if he has a test meter to test his :hmmm: If anyone else has a conion/helix/clairtone this could be vital info ;-)
Sorry bill, don't have a meter.
No problem!!!
 

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
Ok so without the meter test just going by band colors the closest match was 35 ohms. I used 33 ohms and tested deck And its working 100% for full tape:-) thanks GZ, Norm and everyone else who helped!!!
 

-GZ-

Member (SA)
Oct 8, 2010
2,238
7
38
Boom Central
baddboybill said:
Ok so without the meter test just going by band colors the closest match was 35 ohms. I used 33 ohms and tested deck And its working 100% for full tape:-) thanks GZ, Norm and everyone else who helped!!!
glad you got it workin bill!
Out of curiosity...what band colors are on the new one? Man my eyes were fn with me!!
 

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
-GZ- said:
baddboybill said:
Ok so without the meter test just going by band colors the closest match was 35 ohms. I used 33 ohms and tested deck And its
working 100% for full tape:-) thanks GZ, Norm and everyone else who helped!!!
glad you got it workin bill!
Out of curiosity...what band colors are on the new one? Man my eyes were fn with me!!
Well we kind of came up with orange, green, black, gold... Which is 35 ohm 1/2 watt @5%. Well see they don't manufacture those resistors I went with orange, orange, black and gold = 33 ohms 1/2 watt @5%. :-)
 

Eddy

Member (SA)
May 20, 2009
598
19
18
baddboybill said:
-GZ- said:
baddboybill said:
Ok so without the meter test just going by band colors the closest match was 35 ohms. I used 33 ohms and tested deck And its
working 100% for full tape:-) thanks GZ, Norm and everyone else who helped!!!
glad you got it workin bill!
Out of curiosity...what band colors are on the new one? Man my eyes were fn with me!!
Well we kind of came up with orange, green, black, gold... Which is 35 ohm 1/2 watt @5%. Well see they don't manufacture those resistors I went with orange, orange, black and gold = 33 ohms 1/2 watt @5%. :-)
33 Ohm is the right value for R 343 . I checked the resistor in my Clairtone( Orange Orange Black)
35 Ohm should not be a problem though
As long as you use at least the 1/2 Watt version
 
Status
Not open for further replies.