Clairtone 7980

Status
Not open for further replies.

Jwrok707

Member (SA)
Nov 24, 2010
689
0
0
Toronto
My clairtone 7980 when plugged into wall and not turned on by power switch is completely functional. Then when power button is pushed obviously remains powered but then the lights in the radio tuner are displayed.
This can't be normal, any suggestions as to if this is a big problem?
 

Jwrok707

Member (SA)
Nov 24, 2010
689
0
0
Toronto
Hey bill the top deck works and the one on bottom I think needs belts. With referring to SLEEP mode would that suggest it can be manipulated to work again or does that mean it's broke?
 

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
No the sleep mode is that when radio switch is in off position you can listen to the radio/tape while pressing play on deck, and once deck is at end of tape the deck shuts off radio automatically...but if the deck is soft mechanism and the deck never finished fully then the micro switch is still allowing power therefore the radio will not turn off until the micro switch is in off mode :-/ To remedy this you have have to manually finish turning the wheel inside deck for it to complete cycle :-) Hope this helps :thumbsup:
 
Status
Not open for further replies.