Best belt supplier in the U.S.

I've had nothing but great experience dealing with Studio Sound Electronics. They have a huge selection of belts and the prices can't be beat!

http://www.studiosoundelectronics.com

Thanks for that Fatdog-I just need to figure out what belt-kit I need for the GF-8989II.
Thanks for putting up a new board!-GB.

Hey Jeff, if the 8989 uses the same cassette mechanism as the 777 or the 9494, I'd say you need the following:

SBM6.0 (Square Belt Medium)
6.0 Inch / 15.2cm Inside Circumference
.051 Inch / 1.3mm Thick and Wide

FBS11.5 (Flat Belt Small)
11.5 Inch / 29.2cm Inside Circumference (total length)
.025 Inch / .6mm Thick
.125 Inch / 3mm Wide

On the GF-777, the following belt is for the tape counter:

SBS7.4 (Square Belt Small)
7.4 Inch / 18.8cm Inside Circumference (total length)
.046 Inch / 1.2mm Thick and Wide

Maybe jaetee or Uncle Ed can confirm this.

Fatdog said:

Hey Jeff, if the 8989 uses the same cassette mechanism as the 777 or the 9494, I'd say you need the following:

SBM6.0 (Square Belt Medium)
6.0 Inch / 15.2cm Inside Circumference
.051 Inch / 1.3mm Thick and Wide

FBS11.5 (Flat Belt Small)
11.5 Inch / 29.2cm Inside Circumference (total length)
.025 Inch / .6mm Thick
.125 Inch / 3mm Wide

On the GF-777, the following belt is for the tape counter:

SBS7.4 (Square Belt Small)
7.4 Inch / 18.8cm Inside Circumference (total length)
.046 Inch / 1.2mm Thick and Wide

Click to expand...

Thanks Bobby for that-I will be ordering next week.

[BTW-I have run Phpbb boards for years-If you need any help with anything don't be afraid to ask!!]
Great site-I love it!
Have a great week-Jeff(GB.)
Jeff.

Ghettoboom767 said:

[BTW-I have run Phpbb boards for years-If you need any help with anything don't be afraid to ask!!]
Great site-I love it!
Have a great week-Jeff(GB.)
Jeff.

Click to expand...

Thanks for the offer, Jeff. If the time comes where we actually need moderators, I'll probably promote all you guys!!

Fatdog said:

Ghettoboom767 said:

[BTW-I have run Phpbb boards for years-If you need any help with anything don't be afraid to ask!!]
Great site-I love it!
Have a great week-Jeff(GB.)
Jeff.

Click to expand...

Thanks for the offer, Jeff. If the time comes where we actually need moderators, I'll probably promote all you guys!!

Click to expand...

Well, at least we have a good example of how we SHOULD NOT conduct ourselves!!!

hey jt normaly i buy a whole bunch of different sizes then i will test fit which one works the best since most of the time they are broke then i keep an tabs on the most ones i have used then i know which ones to buy the most

i got a turntable belt from studiosoundelectronics,exc service def highly recommend them

...great info...thanks FD!!

I agree 100% Bobby.
I've had nothing but good experiences with Studio Electronics. They are the best!