Sharp GF-9X9X belt sizes please...

Status
Not open for further replies.
jaetee

jaetee

Member (SA)
May 5, 2009
2,042
8
38
Florida's West Coast
Anyone know the exact belt sizes needed to properly replace all three belts in the following Sharp models:

GF-9191
GF-9696

I'm trying to get some belts here and into the 9191 before the meet.

I'm 95% sure they are the same belts for both decks as they look IDENTICAL (except for pitch control on the 9696, but that's just an extra board and different motor. Has nothing to do with the actual belts.

I suspect the GF-9292 and GF-9494 share the same belts as well, and maybe even the GF-9090... All five of those GF's seem to have the exact same button layout and size.
 
jaetee

jaetee

Member (SA)
May 5, 2009
2,042
8
38
Florida's West Coast
Okay..., because of the rapidly approaching meet deadline, I put in a call to my local, trusty technician... (the guy is really good) and he has given me the "confirmed" list of 9090 & 9494 belt sizes as follows.

Here they are for posterity, should anyone else be researching this as well:

Posted, alongside their MCM generic part numbers. FYI: MCM generic belts are quite good, but typically sell for less than half the price of most others.

FRW 10.1 (MCM # 42-450) this is the main flat belt direct replacement
SBS 7.0 (MCM # 42-200) smallest square belt, also direct replacement
SCX 7.4 (closest MCM: 42-210) MCM's belt is 0.1" longer at 7.5", but should work.

I just ordered several sets of these, thinking I might as well update all the ones in my GF-9696 and 9191 in one big project. I should then also be able to confirm that these belts work in the 9191/9292 as well.

Wish me luck!

Hopefully, I'll have these Sharps ready for the meet with fully working decks so we can give them a proper pounding!!!!

  • 42-450 Flat Belt: DISTRIBUTED BY MCM: 42-450 $1.99

    42-200 Square Belt: DISTRIBUTED BY MCM: 56MMX1.2 $0.79

    42-210 Square Belt DISTRIBUTED BY MCM: 60MMX1.2 $0.79





JT
 
Status
Not open for further replies.
Top Bottom