Jump to content



Photo

Drawing the spare tape drawer, cam and guides


  • Please log in to reply
7 replies to this topic

#1 caution

caution
  • Members (SA)
  • 1,926 posts
  • LocationHillsboro, Oregon

Posted 08 November 2019 - 11:24 AM

First the cam for the drawer's locking pin:

 

49033720168_62e83a306d_b.jpg

49034219221_4f918e851e_b.jpg

49033718413_2e3452887f_b.jpg

49034524682_42b1576f88_b.jpg

49034219401_76a082bda5_b.jpg



#2 Superduper

Superduper
  • Boomus Fidelis
  • 6,849 posts
  • LocationSomewhere over the rainbow, USA

Posted 08 November 2019 - 11:38 AM

Those cams are rarely missing though right?  Unlike the tray, it appears that the cams are screwed in from the inside of the boombox.



#3 caution

caution
  • Members (SA)
  • 1,926 posts
  • LocationHillsboro, Oregon

Posted 08 November 2019 - 11:41 AM

You're thinking of the guides. Those are coming next :-)

There are five pins on the tray: One on the back for this cam (which always seems to break off), and two pins on each side of the drawer to guide it as it opens and closes.



#4 Superduper

Superduper
  • Boomus Fidelis
  • 6,849 posts
  • LocationSomewhere over the rainbow, USA

Posted 08 November 2019 - 11:46 AM

Oh I see, the cams are part of the latch/unlatch mechanism?



#5 caution

caution
  • Members (SA)
  • 1,926 posts
  • LocationHillsboro, Oregon

Posted 08 November 2019 - 11:52 AM

This thread from Dbzerk shows the cam, it sits like a cap on top of the drawer's guidepin, sticking through the slot in the chassis.



#6 caution

caution
  • Members (SA)
  • 1,926 posts
  • LocationHillsboro, Oregon

Posted 10 November 2019 - 12:28 AM

The guides and drawer:

 

49041805802_91dec8e1e5_b.jpg

49041090863_6a38d6cfcd_b.jpg

49041804302_54b197162a_h.jpg

49041804247_3e928945ed_h.jpg



#7 Superduper

Superduper
  • Boomus Fidelis
  • 6,849 posts
  • LocationSomewhere over the rainbow, USA

Posted 10 November 2019 - 01:04 AM

Absolutely remarkable, as usual.

#8 Bloodhound

Bloodhound
  • Members
  • 22 posts

Posted 10 November 2019 - 06:10 AM

Impressive work!  :drool: