Jump to content


Sharp WQ-T351 x-bass speaker refoam or replace. Help!

  • Please log in to reply
4 replies to this topic

#1 KaneDom

  • Members
  • 10 posts

Posted 11 June 2019 - 04:00 PM

Hello guys I was restoring a Sharp WQ-T351, and the hidden x-bass spaker is bad. Probably the foam of it is gone.

As am aware its a small 8cm woofer. Any idea where to find a replacement foam?


#2 JVC Floyd

JVC Floyd
  • Boomus Fidelis
  • 6,615 posts

Posted 12 June 2019 - 02:21 PM

EBay is the cheapest route . you have to measure the cone and the frame to get the exact size but most seller give you the specs of the parts they are selling.

#3 Reli

  • Boomus Fidelis
  • 5,660 posts
  • LocationUSA

Posted 12 June 2019 - 07:59 PM

You'll need to open it up and see if the speaker is round, oval or square

#4 hopey

  • Members (SA)
  • 411 posts
  • LocationMelb AU

Posted 19 June 2019 - 12:09 AM

If there is no sound it maybe the amp circuit and not the speaker. Once you pull it down check the continuity of the voice coil.

What about the twin decks I guess they don't work?

#5 KaneDom

  • Members
  • 10 posts

Posted 06 July 2019 - 06:18 AM

Hii sorry for the late response. Both normal and xbass amps are working, as well as the tape decks. The issue is the xbass speaker. The foam surround of it is dead.