Hi guys, I decided to 3D model a Sanyo M9994 to print so I could have a boombox ornament for the tree, and also to hang from the mirror in my car (the Sanyo converts to mm measurements and scales by four perfectly 
). I was wondering if anyone knew what diameter tweeters (more so need the diameter of the trim rings around them) it has? Here are the additional measurements I need, like to be precise(ish).... Thank you in advance 
Dark blue- height of silver trim at front
Red- height of silver trim at rear
Green- depth of silver trim, front to rear
Purple- height of that accent thing at front
Light blue- width of that accent thing
Yellow- diameter of tuner dial
Pink- height of power inlet thing
White- depth of rear box
Brown- height of handle from top of box at front
Red- height of input box hole
Yellow- width of input box hole
Green- Height of space from bottom of input box to bottom of the unit
Purple- height of indent in rear case
Also, could anyone provide the height and width of the radio dial window (clear plastic)?
Height and width of the cassette door?
Height and width of the VU meter windo (clear plastic)?
Width, height and depth of one of the cassette buttons? (play, stop, etc.)
Diameter of volume knob?
Width of handle (outside faces of the chrome bars)?
Height and depth of plastic part of the handle?
Width and depth of the silver trim face where the switches are on top?
Any measurements would greatly help, I know it's a lot but I'd love to make a scale model of these old boomboxes
And again, a big thank you in advance!
oops, forgot a couple...
Green- overall height of box at front
Yellow- overall height of box at rear
oops
). I was wondering if anyone knew what diameter tweeters (more so need the diameter of the trim rings around them) it has? Here are the additional measurements I need, like to be precise(ish).... Thank you in advance Dark blue- height of silver trim at front
Red- height of silver trim at rear
Green- depth of silver trim, front to rear
Purple- height of that accent thing at front
Light blue- width of that accent thing
Yellow- diameter of tuner dial
Pink- height of power inlet thing
White- depth of rear box
Brown- height of handle from top of box at front
Red- height of input box hole
Yellow- width of input box hole
Green- Height of space from bottom of input box to bottom of the unit
Purple- height of indent in rear case
Also, could anyone provide the height and width of the radio dial window (clear plastic)?
Height and width of the cassette door?
Height and width of the VU meter windo (clear plastic)?
Width, height and depth of one of the cassette buttons? (play, stop, etc.)
Diameter of volume knob?
Width of handle (outside faces of the chrome bars)?
Height and depth of plastic part of the handle?
Width and depth of the silver trim face where the switches are on top?
Any measurements would greatly help, I know it's a lot but I'd love to make a scale model of these old boomboxes
And again, a big thank you in advance!
oops, forgot a couple...
Green- overall height of box at front
Yellow- overall height of box at rear
oops