SHARP VZ-2000 LP record 's problem

Status
Not open for further replies.
Funkateer38

Funkateer38

Member (SA)
Apr 24, 2017
142
13
18
Hi all

Being restored a SHARP VZ-2000 and I'm blocking.

The radio is working.
The cassette player is working.

But when I select the LP record part, the solenoids A and B will boot up and shunt it down. I notice that the EP/LP LEDs are off.

Any ideas?

In advance, thank you
 
JVC Floyd

JVC Floyd

Inactive (Delete)
May 6, 2009
7,322
419
83
54
Maryland USA.
I would check the auto select switch inside the lp door also make sure this unit is standing upright because it won't play records if the switch in the foot is not pressed in.
 
Funkateer38

Funkateer38

Member (SA)
Apr 24, 2017
142
13
18
Thanks Funkateers,

I set up the LP record.
Now just rewind and forward works.

But EP/LP LEDs are still off. Whatever the selection mode

Best regards
 
Funkateer38

Funkateer38

Member (SA)
Apr 24, 2017
142
13
18
Finally, LP record works,

It was one of two big springs in wrong position.

My last problem :

The LEDs of selection play, Cut, rewind, .... are still switch off
 
Status
Not open for further replies.
Top Bottom