Conion CityBoy belts

Status
Not open for further replies.

Sel The Don

Member (SA)
Jun 5, 2015
277
28
28
44
Bursa, Turkey
I've been given a few pointers as to where I can find belts but unfortunately I can't find the belt sizes I'm looking for.

From what I've read on another thread is that the main belt is an FSB 9.0, with the tape counter an SBS 5.0 (I've found a 5.1, will this be ok?)

I also want to change the 'Tape Run' display belt but I have no idea what it is.

Could anyone give me any info as to where I can find the belts I need and also what is the size of the Tape Run belt.

Thanks peeps!
 

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
Might not need to change any counter belts as these dont usually go bad. But if does measurements of old belts and deducting about 5% usually works just make sure its not tight
 

Sel The Don

Member (SA)
Jun 5, 2015
277
28
28
44
Bursa, Turkey
The counter belt is actually ok but I thought I'd just swap everything to new as the drive belt has gone. Thanks for the info though, there's a few boxes I have that need new belts but I can't find any info on them.
 
Status
Not open for further replies.