PHILIPS D8444 BELTS NEEDED/PART NUMBERS ETC

Status
Not open for further replies.
S

STEVED8444

Member (SA)
Feb 25, 2017
3
0
0
Hi,everyone.
I thought i would buy what i could not afford in 1985 as a break dance wanna be fifteen yr old lol.
I bought one a year ago but the tape counter never worked but played tapes until a few weeks ago.

Where can i get a replacement drive belt and missing belt for tape counter.
I have my d8444 in bits at the moment and i can see the drive belt is snapped so i could replace that one,but the tape counter one is missing .
Does the tape counter run off the same motor and then to the counter pulley.

Any pics,advice gratefully received.

Thanks steve
 
S

STEVED8444

Member (SA)
Feb 25, 2017
3
0
0
Hi,thanks for the help.
I believe i need a sbo 7.2 for tape counter and sbs 9.5 for main tape drive.

I cannot find sbo 7.2 on there website?

Thanks steve
 
baddboybill

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
STEVED8444 said:
Hi,everyone.
I thought i would buy what i could not afford in 1985 as a break dance wanna be fifteen yr old lol.
I bought one a year ago but the tape counter never worked but played tapes until a few weeks ago.

Where can i get a replacement drive belt and missing belt for tape counter.
I have my d8444 in bits at the moment and i can see the drive belt is snapped so i could replace that one,but the tape counter one is missing .
Does the tape counter run off the same motor and then to the counter pulley.

Any pics,advice gratefully received.

Thanks steve
Click to expand...
Honestly another issue with these units is the gear that breaks and causes deck not to work as well so you may want to check into that. ;-)
 
Status
Not open for further replies.
Top Bottom