Jump to content


JVC PC-V88 display

  • This topic is locked This topic is locked
4 replies to this topic

#1 Stewart

  • Members
  • 2 posts

Posted 20 January 2017 - 04:49 PM

The digital display has stopped working. If the display needs replacing, does anyone know where to get one or how to replace it. Any help would be appreciated.

#2 MyOhMy

  • Members (SA)
  • 2,516 posts
  • LocationSleaford, Lincolnshire, UK.

Posted 20 January 2017 - 05:52 PM

Oh, Hello!   You could try searching the forum for help but I'd suggest the best thing to do would be to start HERE, it worked for me.  :yes:  :thumbsup:

#3 Fatdog

  • Administrators
  • 10,806 posts
  • LocationMiddle Tennessee, U.S.A.

Posted 21 January 2017 - 01:42 AM

Welcome aboard, Stewart!  I don't have any experience with the PC-V88, but I know the digital displays in the PC-55 are hooked in with ribbon cable.  It might sound silly, but I would first check to see if your display uses the same type of connection and then check to see if it is loose.

#4 Stewart

  • Members
  • 2 posts

Posted 21 January 2017 - 04:24 PM

I will look into that. Thanks guys. New to the sight. There's a lot to look at.

#5 JVC Floyd

JVC Floyd
  • Boomus Fidelis
  • 6,523 posts

Posted 21 January 2017 - 04:49 PM

Yes I would check the slat wire connections also I've read that if you apply heat to the LCD panel it was sometimes reactivate the panel but you gotta watch how you apply it from a distance and not on high heat just enough to get it warm to the touch but not melt anything.