I've just taken in another TRK-8130E purely for the parts and to further practise my skills. It's a 'not working' BB so I plugged it into the mains to check and it was dead as expected. However, once I began srtipping out the interior I came across a blown fuse.
Now, I'm not technically munded so please forgive my ignorance on this. I've checked the wiring diagram and schematics but don't understand all the pretty but confusing graphics in the diagrams. Have I correctly identified with the letter 'A' the blown fuse and what is the spec I would need for replacement? Stamped into the blown fuse is 'T2A/250V' . I believe the second fuse identified in the image is the main(s) supply fuse for the BB?
Now, I'm not technically munded so please forgive my ignorance on this. I've checked the wiring diagram and schematics but don't understand all the pretty but confusing graphics in the diagrams. Have I correctly identified with the letter 'A' the blown fuse and what is the spec I would need for replacement? Stamped into the blown fuse is 'T2A/250V' . I believe the second fuse identified in the image is the main(s) supply fuse for the BB?
I feel a I've learned something about that thar electrickery now! 