Phillips D8443 belt sizes

Anyone know the sizes for Phillips D8443 belt sizes

I thought I posted on the one I did a while back... I might still have the packaging. I'll look.

I had them in my toolbox, looks like what I used was SBS9.5 & SBO7.2

I know one was for the drive and the other for the counter, but don't remember which each was. I also bough a SBS10.0 just in case, but the 9.5 worked great. Got mine from Studio Sound, not sure if the part numbers are different at different places.

Any questions just let me know.

Thanks for your reply
So they are both square ?
unusual
Its for a friend who lives in another country so i havnt seen the mech
and unfortunately dont own one
Thanks again

Yea I did mine for a friend as well. But yeah at least what I use were square. The old belts were nowhere to be found when I did it, but based on the v-grooves on the pulleys, those were my best guesses.