951 -2yr storage repair help!

HeY all my Rokaz! I been away a while with on&off Health. I had this 951 in resto works 2yrs ago. Unboxed and wanted to retackle. In previous posting. I obtained a back chassis, w torn pads on Power PCB. No power on RED. But regular fuse checker other areas got current.1st issue. 2nd. TF showed no juice. no heat transfer. 3rd Main Unit. after hook up. Power button never ingaged. but showed current in main line. .1 orange wire in crimped bundle? disconnected. just above board over the decks.Hmmm Don't wish to dissasemble. LASONIC 920. says. not sure either strange situation. any advice. or opions thank you guys!

So you have a Lasonic 951, and what is the question?

I will see if I can clean the workbench and open my 951 n take some pics. Maybe we can track down ALL the transformer wires

I will do the same, I just need to know what he is looking for.

Lasonic 920 and I have been through this head jammer. I came across a beat up Back chassis to a 975. with torn pad near R+ B - wires. with fuse tester. all other areas show power. and fuse tester light come on . At RED wire no power. Tried a temp jumper but a short while. hooked to main unit. No powerUP? button pushed will not transfer any electrical current. Fuse Tester at Hot lead shows current at pin and Grey line wire in Pic. Also Lasonic 920 IS INVESTIGATING Orange wire torn from unknown Point? This is for you FUZ!