Posted 11 December 2014 - 07:57 PM
Know the crazy part, I put headphones in the front jack and everything is fine!? Left and right work as normal. Crazy!
I do know I need to deoxit all buttons and sliders. All sliders feel tight. I do not know if that is normal or not but all sliders work fine except sound issue I just explained, just tight.
Posted 24 September 2016 - 07:47 PM
I'm just guessing, but I suspect that someone rewired your speakers to account possibly for a blown speaker. So perhaps both speaker channels outputs are being diverted to one speaker. The headphone jacks intercepts the speaker outputs before it gets to the speakers and diverts the signals to the headphones and that's possibly why it sounds normal in that mode.
Posted 25 September 2016 - 12:17 AM
Bad Boy Bill
Posted 26 November 2016 - 06:00 PM
Posted 04 March 2017 - 08:08 AM
I thank you all for your opinions! I wish someone on this site repaired members radios, That would be great.
Yes, all speakers work hopey.
Great advice Norm!
Just realized hopey not sure if all speakers work, not tested. But if it works normal with headphones plugged in (sliders), would that not mean that the sliders are working ok?
Posted 12 April 2017 - 03:53 PM
Hmmm... Could that be that the 9494 has got a connectors for external speakers? If so, please check them, as they can also oxydize and one speaker could have the negative wire routed through the connector, and since it is rusty/failed, it routs the current to the another speaker, possibly producing such strange behavior.
By the way, that could also go for the headphone connector. Please clean the connectors and their contacts, especially those that make contact when there is no headphones/speakers plugged in.