It's about time to start another build thread, because the pictures are piling up..
I had this idea over a year ago when I got my first Lasonic TRC-931, and am now just making it happen!
I scored 2 separate BIN deals with absolutely NO DESCRIPTION, listed as "parts or not working" but luckily they both were in working condition.. Sure.. I could've made one perfect box out of the two, but where is the fun in that? To have a minty 931 like everyone else..?
I gotta be different, so time to start customizing!!
Here are the working donors for this project.. both powered on, but one plays radio and one plays tapes, but AUX-IN works on both..
las.JPG 98.67K 45 downloads
*WARNING GRAPHIC CONTENT!!*
With scalpel in hand the incision has begun...
2.JPG 86.15K 50 downloads
Getting a little perspective on size and placement of this makeshift unit..
5.JPG 75.52K 51 downloads
Started the welding process with a weave pattern, but later switched to "push/pull" puddle to get better penetration..
3.JPG 142.51K 51 downloads
Bottom section welded together and weld seam reinforced with epoxy..
4.JPG 78.27K 39 downloads
During the fitment of this process I used a square to make sure all the edges/ lines/ and angles were lining up..
Welded the top cap(s) to the woofer bottom and shortened the handle 8"
bocks.JPG 74.5K 46 downloads
Moved the new handle mounts to the center of the unit and start welding up all the unused holes..
6.JPG 79.41K 40 downloads
7.JPG 129.21K 45 downloads
With most everything smoothed up and white woofers in place this box is taking shape!
8.JPG 83.52K 40 downloads
Starting to work on the back of the cabinet, making sure fitment is correct..
9.JPG 97.3K 52 downloads
10.JPG 83.43K 46 downloads