Anybody have any extra cassette belts?
- Thread starter autobot84
- Start date
- Status
can you estimate the length i might have one , i have lots of belts and i can look through my parts junkers if needed.
is that the belt length in a loop or broken stretched out straight ? i have one that is 8 linear inches total circumference but can be stretched to 9 inches easily if need be .oh and i'm assuming from memory it's a square belt not a flat belt?.
If you're in the States, this guy ships super-fast and what a deal. I bought the 30x square belts and 20x flat belts. That was just about a year ago and I haven't had to buy any belts since. Best value around, as far as belts are concerned. 
http://www.ebay.com/itm/30-cassette-tape-machine-belt-NEW-Assorted-COMMON-BELT-REPAIR-REBUILD-USA-/160688826921?pt=US_Home_Audio_Cassette_Decks&hash=item2569ccea29
http://www.ebay.com/itm/30-cassette-tape-machine-belt-NEW-Assorted-COMMON-BELT-REPAIR-REBUILD-USA-/160688826921?pt=US_Home_Audio_Cassette_Decks&hash=item2569ccea29
I've had belts from this seller too. He's expensive on the face of it compared to the likes of Malvern Audio or Revox.de but even sending to the UK, his p&p was only around £4 and that made the cost acceptable when others would have sent that quantity by several packages.superlew said:If you're in the States, this guy ships super-fast and what a deal. I bought the 30x square belts and 20x flat belts. That was just about a year ago and I haven't had to buy any belts since. Best value around, as far as belts are concerned.
http://www.ebay.com/itm/30-cassette-tape-machine-belt-NEW-Assorted-COMMON-BELT-REPAIR-REBUILD-USA-/160688826921?pt=US_Home_Audio_Cassette_Decks&hash=item2569ccea29
For a counter you can always use a rubber band in place of belt usually with no issues
Bad Boy Bill
Bad Boy Bill
Also I save all my old belts unless they are totally ruined especially for having extra counter belts. 
Bad Boy Bill
Bad Boy Bill
same here those old belts saves my bacon plenty of times. i only keep them if they are good enough to reuse .baddboybill said:Also I save all my old belts unless they are totally ruined especially for having extra counter belts.
Bad Boy Bill
superlew said:If you're in the States, this guy ships super-fast and what a deal. I bought the 30x square belts and 20x flat belts. That was just about a year ago and I haven't had to buy any belts since. Best value around, as far as belts are concerned.
http://www.ebay.com/itm/30-cassette-tape-machine-belt-NEW-Assorted-COMMON-BELT-REPAIR-REBUILD-USA-/160688826921?pt=US_Home_Audio_Cassette_Decks&hash=item2569ccea29
I've bought belts from him and was about to post this. http://www.ebay.com/itm/160688826921?_trksid=p2047675.m570.l4456&_trkparms=gh1g%3DI160688826921.N8.S1.M1386
I don't remember what sizes i bought for my m70, i know i bought bigger and smaller than i measured just in case, but i can check later. If you haven't solved this yet.
Thank you for the linky Superlew.......superlew said:If you're in the States, this guy ships super-fast and what a deal. I bought the 30x square belts and 20x flat belts. That was just about a year ago and I haven't had to buy any belts since. Best value around, as far as belts are concerned.
http://www.ebay.com/itm/30-cassette-tape-machine-belt-NEW-Assorted-COMMON-BELT-REPAIR-REBUILD-USA-/160688826921?pt=US_Home_Audio_Cassette_Decks&hash=item2569ccea29
I thought I posted from my phone, must not have sent, but no, it turns out the 9.0 I had was the flat belt, and my square was a 6.6, sorry. Glad you got one on the way though.autobot84 said:jvc floyd is sending me one, but if you
jvc floyd is sending me an extra, but if you have one that is close i will take it also just in case the 1st one doesn't fit.
- Status