RED Wires are desolderd and loose, Have idea where by a area where a mass of solder was removed... Don't want to guess this procedure. AC/DC switch replaced, from original broken off at base...
920 poweless/desolderd wires?
- Thread starter rokbox2112
- Start date
- Status
Try and see if works on batteries or not. Insulate the end of the "wire in question" when you do it.
Here is a video of the inside of the 920. I'm not sure if the wiring you have is the same because they made so many of these at different factories with different main amp boards.
http://youtu.be/aFxA3_PTLNQ
http://youtu.be/aFxA3_PTLNQ
Here is a video of the inside of the 920. I'm not sure if the wiring you have is the same because they made so many of these at different factories with different main amp boards.
http://youtu.be/aFxA3_PTLNQ
Looks like red wire in Question is next to the function switch as here in pic. Might be tan/brown on yours Chris
http://youtu.be/aFxA3_PTLNQ
Looks like red wire in Question is next to the function switch as here in pic. Might be tan/brown on yours Chris
- Status