931 early 2nd edition LED VU question....

Status
Not open for further replies.

blu_fuz

Moderator
Staff member
Jun 3, 2009
10,666
155
63
40
WI
So my brown power lable 2nd gen 931 has a funky issue with the LED vu meters.


When on radio or line-in the LEDs are all pretty much on full bright and all on and really only flicker off when there is just about nothing broadcasting through the signal.


When using a tape, the VUs act normal and all the LEDs flicker like they should going on and off with the playback signal.


Question is, why? :lol:
The sound is good on all functions, but the VUs just act strange on radio and line-in. :hmmm:
 

blu_fuz

Moderator
Staff member
Jun 3, 2009
10,666
155
63
40
WI
Honestly, I will not clean the function switch. I don't want to take the chance working that knob and possibly breaking that brittle gear inside. Sorry Bill, good suggestion though! :w00t: :yes: ;-)
 

blu_fuz

Moderator
Staff member
Jun 3, 2009
10,666
155
63
40
WI
There's got to be something else I can try :hmmm: .


It's almost as if the input signal from the radio and line-in is too high, though it doesn't produce distorted sound.
 
Status
Not open for further replies.