Jump to content


Photo

FS ~ JVC replica straps, J hook, loop, or handle straps!


  • Please log in to reply
329 replies to this topic

#301 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 14 November 2016 - 08:19 AM

I'm here when you are ready Will! Shoot me a PM and we can figure out what you need.



#302 baddboybill

baddboybill
  • Boomus Fidelis
  • 12,589 posts
  • LocationIn the middle of nowhere!!

Posted 07 December 2016 - 11:53 PM

Joe what straps you have in 2" width?

#303 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 08 December 2016 - 09:00 AM

I don't stock any 2" because all the JVC hardware I cut out is for 1.5".

 

I might have a couple colors in 2" but I will have to check.



#304 Lasonic TRC-920

Lasonic TRC-920
  • Moderators
  • 13,001 posts
  • LocationOjai, California

Posted 09 December 2016 - 07:09 PM

I don't stock any 2" because all the JVC hardware I cut out is for 1.5".

 

I might have a couple colors in 2" but I will have to check.

 

Taking my grey JVC strap I got from you in Vegas to Venice tomorrow to click it into my new Dream Box I am getting from Reli  :w00t:

 

More on that later!

 

ALSO, look for fresh new "Joe's Custom Straps" ad in issue 4 of Boombox Magazine! ;-)



#305 mancardo

mancardo
  • Members
  • 1,379 posts
  • LocationAZ U.S.

Posted 10 December 2016 - 12:42 AM

Taking my grey JVC strap I got from you in Vegas to Venice tomorrow to click it into my new Dream Box I am getting from Reli  :w00t:

 

More on that later!

 

ALSO, look for fresh new "Joe's Custom Straps" ad in issue 4 of Boombox Magazine! ;-)

:thumbsup:  :thumbsup:  :thumbsup: 



#306 Lasonic TRC-920

Lasonic TRC-920
  • Moderators
  • 13,001 posts
  • LocationOjai, California

Posted 11 December 2016 - 07:49 PM

Hey Joe,

 

  So, I picked up this gem from Reli (will post pictures in the collections thread) JVC 3090 EN.

 

I brought one of your straps with me, but it didn't go in far enough to lock. Are their different JVC straps? Should I just grind it down?

 

Attached File  20161211_173033.jpg   122.74K   4 downloadsAttached File  20161211_172843.jpg   110.67K   4 downloads

 

 



#307 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 12 December 2016 - 09:06 AM

JVC did have a 1" wide strap and hardware, which is probably the one that would fit your blaster. They are black straps and I based my original strap design off of the 1" strap but after doing that I found that JVC had 1.5" wide straps too and have only stuck to making those because they are more comfortable  than the 1" wide.

 

Let me see if I have a 1" wide hardware set laying around.



#308 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 12 December 2016 - 09:11 AM

For now, check to see if these dimensions work on your new JVC of the 1" strap hardware.

 

Attached File  M70 1in hardware.jpg   97.39K   5 downloads



#309 Reli

Reli
  • Members
  • 4,860 posts
  • LocationNorCal

Posted 12 December 2016 - 11:00 AM

Yeah a 1" wide strap would be teh suck.



#310 Lasonic TRC-920

Lasonic TRC-920
  • Moderators
  • 13,001 posts
  • LocationOjai, California

Posted 12 December 2016 - 11:31 AM



For now, check to see if these dimensions work on your new JVC of the 1" strap hardware.

 

attachicon.gifM70 1in hardware.jpg

 

Here's what I got

 

Attached File  20161212_092632.jpg   89.66K   2 downloads



#311 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 12 December 2016 - 12:18 PM

I think the 1" strap hardware is exactly what you are looking for. Your mic is showing about 1.63" BUT your box also has a wider slot opening for the actual hardware to slide into on each side. My measurement of the M70 1" strap hardware is 1.654". I bet it slides in perfect.

 

 

 

Don't you have an old 1" strap I put together for you years ago? There was about 20-30 1" style that I put a JVC shoulder pad on too like shown below.

 

Attached File  PICT0121.JPG   106.48K   2 downloads

 



#312 Lasonic TRC-920

Lasonic TRC-920
  • Moderators
  • 13,001 posts
  • LocationOjai, California

Posted 12 December 2016 - 01:18 PM



I think the 1" strap hardware is exactly what you are looking for. Your mic is showing about 1.63" BUT your box also has a wider slot opening for the actual hardware to slide into on each side. My measurement of the M70 1" strap hardware is 1.654". I bet it slides in perfect.

 

 

 

Don't you have an old 1" strap I put together for you years ago? There was about 20-30 1" style that I put a JVC shoulder pad on too like shown below.

 

attachicon.gifPICT0121.JPG

 

Here is the internal channel measurement. 

 

Attached File  20161212_111114.jpg   93.02K   2 downloads

 

Attached File  20161212_111135.jpg   153.7K   3 downloads

 

If I got a narrower one from you, then it was the first black one I got for my 838. Later, you sent me a strap with green ends that match the 838 and I think I gifted that first strap to another member. I haven't seen it in many years.



#313 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 12 December 2016 - 02:33 PM

Yup, the smaller hardware/strap combo will fit your radio. I will see if I have any more sets here. You could also use the small 1" strap hardware and just use a 1.5" J-hook strap through the slots of the hardware....



#314 Lasonic TRC-920

Lasonic TRC-920
  • Moderators
  • 13,001 posts
  • LocationOjai, California

Posted 12 December 2016 - 04:32 PM

Yup, the smaller hardware/strap combo will fit your radio. I will see if I have any more sets here. You could also use the small 1" strap hardware and just use a 1.5" J-hook strap through the slots of the hardware....

 

Cool, let me know what you come up with. Thanks Joe!



#315 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 12 December 2016 - 06:39 PM

I gotcha covered.

#316 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 12 December 2016 - 09:51 PM

A few more put together.

Attached File  IMG_7191.JPG   282.54K   3 downloadsAttached File  IMG_7190.JPG   291.81K   2 downloadsAttached File  IMG_6088.JPG   218.48K   2 downloads

#317 trippy1313

trippy1313
  • Members
  • 1,735 posts
  • LocationSeattle-Tacoma, WA

Posted 13 December 2016 - 12:07 AM

Good ole Joe. The Strapmaster!!!

#318 baddboybill

baddboybill
  • Boomus Fidelis
  • 12,589 posts
  • LocationIn the middle of nowhere!!

Posted 13 December 2016 - 07:51 AM

Can't wait for mine. Joe you are awesome brother!!!!



#319 Lasonic TRC-920

Lasonic TRC-920
  • Moderators
  • 13,001 posts
  • LocationOjai, California

Posted 13 December 2016 - 10:57 AM

:thumbsup:  :thumbsup:  :thumbsup:



#320 1313jperales

1313jperales
  • Members
  • 1 posts

Posted 02 January 2017 - 09:35 PM

Were could I order a black strap for my jvc rc m50jw

Were could I order a black strap for my jvc rc m50jw

#321 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 03 January 2017 - 08:09 AM

Right here 1313jp! I will message you.



#322 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 14 March 2017 - 07:23 PM

Bumpboxx straps were bound to happen.

Now offering custom straps for your bumpboxx.

Attached File  IMG_8201.JPG   112.26K   3 downloadsAttached File  IMG_8204.JPG   106.04K   5 downloads

#323 baddboybill

baddboybill
  • Boomus Fidelis
  • 12,589 posts
  • LocationIn the middle of nowhere!!

Posted 15 March 2017 - 05:45 AM

Very cool. 😎

#324 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 15 March 2017 - 08:10 AM

Attached File  IMG_8202.JPG   137.38K   1 downloadsAttached File  IMG_8203.JPG   143.98K   1 downloads

#325 dans28

dans28
  • Members
  • 2 posts

Posted 20 March 2017 - 05:39 PM

thanks plenty I got mine today.. NICE  :clap:

#326 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 22 March 2017 - 12:46 PM

Glad to help Dan!



#327 Lasonic TRC-920

Lasonic TRC-920
  • Moderators
  • 13,001 posts
  • LocationOjai, California

Posted 30 March 2017 - 03:50 AM

Bumpboxx straps were bound to happen.

Now offering custom straps for your bumpboxx.

attachicon.gifIMG_8201.JPGattachicon.gifIMG_8204.JPG

 

Oh that's SWEET!



#328 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 04 April 2017 - 07:32 AM

Strap production is on a temporary hold during our move as the supplies are packed away. This could be for a couple/few months. I will update here when I am ready to rock again.

 

Thank you!

 

- Joe 



#329 trippy1313

trippy1313
  • Members
  • 1,735 posts
  • LocationSeattle-Tacoma, WA

Posted 11 April 2017 - 08:55 PM

Strap production is on a temporary hold during our move as the supplies are packed away. This could be for a couple/few months. I will update here when I am ready to rock again.

Thank you!

- Joe


You're moving??? I feel like I knew this, but can't remember.

#330 blu_fuz

blu_fuz
  • Moderators
  • 12,173 posts
  • LocationWI

Posted 12 April 2017 - 07:51 AM

I'll post a thread in the forum about what's going on with us.