Sharp GF-777 Help
- Thread starter mtb_ed
- Start date
- Status
These switches usually have tendency to break at hinge post. If this happens it doesn't put pressure on leaves to turn off. There is a repair to fix by drilling out and putting a small pin in place of post. 
Another issue could be auto deck is in on position causing sleep mode to always be on. Are both your decks fully working. This is usually caused by bad belts.
Another issue could be auto deck is in on position causing sleep mode to always be on. Are both your decks fully working. This is usually caused by bad belts.
Tape deck A isn't at best but looked at it and the PLAY button was pressed (My child no doubt) Just pressed stop and guess what!baddboybill said:These switches usually have tendency to break at hinge post. If this happens it doesn't put pressure on leaves to turn off. There is a repair to fix by drilling out and putting a small pin in place of post.
Another issue could be auto deck is in on position causing sleep mode to always be on. Are both your decks fully working. This is usually caused by bad belts.
I have no power.
Have to laugh
Cheers Ed
Easy fixmtb_ed said:Tape deck A isn't at best but looked at it and the PLAY button was pressed (My child no doubt) Just pressed stop and guess what!baddboybill said:These switches usually have tendency to break at hinge post. If this happens it doesn't put pressure on leaves to turn off. There is a repair to fix by drilling out and putting a small pin in place of post.
Another issue could be auto deck is in on position causing sleep mode to always be on. Are both your decks fully working. This is usually caused by bad belts.
I have no power.
Have to laugh
Cheers Ed
- Status