Jump to content


Photo

Crown CSC 980L engine is stopped no power :-(


  • Please log in to reply
8 replies to this topic

#1 CorafanRIP

CorafanRIP
  • Members
  • 638 posts
  • LocationLeipzig Germany

Posted 03 August 2012 - 11:53 AM

Please help to the CSC 980 is no longer the engine is stopped and does not get any more power someone has a wiring diagram :sad: :sad: :sad: :sad:

Posted Image
Posted Image
Posted Image

the engine is not broken, he suddenly gets no more power which is just as broke :sadno:

#2 monchito

monchito
  • Boomus Fidelis
  • 4,599 posts
  • Locationpythonville florida

Posted 03 August 2012 - 01:35 PM

check microswitch on deck make sure u have power and if it has a circuit where the leads of motor goes ..check to see if y have voltage :-)

#3 tshorba

tshorba
  • Members
  • 551 posts
  • LocationSouth West Victoria

Posted 03 August 2012 - 08:20 PM

:agree: also spin the spindle a few times, the motor might be seized up

#4 CorafanRIP

CorafanRIP
  • Members
  • 638 posts
  • LocationLeipzig Germany

Posted 04 August 2012 - 02:36 AM

check microswitch on deck make sure u have power and if it has a circuit where the leads of motor goes ..check to see if y have voltage :-)


Switch has been tested not responsive to the motor wires checked

non-current motor is not defective foreign source used then turns

themselves :hmmm:

#5 CorafanRIP

CorafanRIP
  • Members
  • 638 posts
  • LocationLeipzig Germany

Posted 04 August 2012 - 02:38 AM

:agree: also spin the spindle a few times, the motor might be seized up


the engine gets no power at all even if I run the contacts together comes to nothing

what should be there just yet broken :hmmm:

#6 monchito

monchito
  • Boomus Fidelis
  • 4,599 posts
  • Locationpythonville florida

Posted 04 August 2012 - 05:50 AM

i see that the motor leads are on the mainboard i would be checking there :yes:

#7 Reli

Reli
  • Boomus Fidelis
  • 4,627 posts
  • LocationUSA

Posted 04 August 2012 - 07:38 PM

Inside seems different than the Crown 850 (below). The heat sink is very different. Are speakers the same?



Posted Image



Posted Image

#8 CorafanRIP

CorafanRIP
  • Members
  • 638 posts
  • LocationLeipzig Germany

Posted 05 August 2012 - 05:47 AM

Inside seems different than the Crown 850 (below). The heat sink is very different. Are speakers the same?



[ Image ]



[ Image ]


yes the speakers are identical, the output stage is slightly larger

#9 CorafanRIP

CorafanRIP
  • Members
  • 638 posts
  • LocationLeipzig Germany

Posted 08 August 2012 - 06:22 AM

Please help to the CSC 980 is no longer the engine is stopped and does not get any more power someone has a wiring diagram :sad: :sad: :sad: :sad:

[ Image ]
[ Image ]
[ Image ]

the engine is not broken, he suddenly gets no more power which is just as broke :sadno:


Thanks to the plan of a user switching from here

the 980 is back in top condition thanks to the workshop that was fast and we paid only 30 € I have class, this workshop is really good but I know these people already privately :yes:

thank you so much again from me :thumbsup: :thumbsup: :thumbsup: