Jump to content


VZ front plastic scratch repair

  • Please log in to reply
38 replies to this topic

#31 Uki

  • Members
  • 23 posts

Posted 15 August 2015 - 01:58 AM

That's great. I will be using this for sure cheers!

#32 baddboybill

  • Boomus Fidelis
  • 10,998 posts
  • LocationHudson Florida

Posted 09 September 2015 - 09:26 AM

Thanks for this post Chris. I'm going to be doing mine shortly.

Bad Boy Bill

#33 decks&cassettes

  • Members (SA)
  • 179 posts
  • Locationnorth of toronto ontario

Posted 02 March 2017 - 01:53 AM

 killer job looks new again id love to find one of these 

#34 caution

  • Members (SA)
  • 1,975 posts
  • LocationHillsboro, Oregon

Posted 02 March 2017 - 01:34 PM

Hey, thanks for bumping this, going to be polishing mine soon!

#35 mancardo

  • Members (SA)
  • 1,394 posts
  • LocationGoodyear, AZ U.S.

Posted 02 March 2017 - 09:02 PM

didn't see this post before....Thanks!

#36 Lasonic TRC-920

Lasonic TRC-920
  • Moderators
  • 14,094 posts
  • LocationNaples, Italy

Posted 03 March 2017 - 03:21 AM

BTW, I haven't done a thread on it, but you can do the same for black plastics. I did the top of a 931 and as long as you keep the speed of the polishing wheel super slow and I mean SUPER SLOW and take your time, you can get all the scratches out of those as well.

#37 Perrin21

  • Members (SA)
  • 37 posts
  • LocationPreston, Lancashire, UK

Posted 21 June 2017 - 03:43 AM

don't forget to wax the plastic afterwards to seal the plastic.  Just use carnauba wax for car.

#38 Beast From The East

Beast From The East
  • Members (SA)
  • 87 posts
  • LocationAthens Greece

Posted 08 February 2018 - 07:32 PM

Another sick one.....i am just a little afraid that even with such info i will be able to do mine i have a bunch that need such a glass resto.......

#39 Beast From The East

Beast From The East
  • Members (SA)
  • 87 posts
  • LocationAthens Greece

Posted 21 February 2018 - 01:14 AM


Lasonic TRC-920


I have 2 VZ3500 covers. You have any polish left? If so, how much to do?

Being I don't have a drill. I would have to make an investment to do the job.

But I will keep an eye out for one in the future. Being I have to polish up 6 of the 777s :rock:  


I do not have any more polish left, but one of those cheap headlight cleaning kits will work. 


Chris what do you think of those two?

Is it worth to get the 3m kit?

Can you recognize if they are burned out?

I have seen somewhere that they talk of a tamiya  3 in one used by modelists

These two are from an Audiosonic tbs a project that i left behind a year or so and want to proceed.

Sorry for asking in here but i have been on Boomboxery for hours to figure out the best solution.

The thing is these are smaller surfaces than the Vz one.

Attached File  IMAG1656.jpg   42.54K   0 downloadsAttached File  IMAG1657.jpg   43.07K   0 downloads