Hitachi TRK-3D80au

Status
Not open for further replies.
The Box of Boom

The Box of Boom

Member (SA)
Dec 18, 2011
333
0
16
47
Sydney/Australia/Earth
Hi Guys
Is there anyway I can access the back of the speaker grills on this radio so i can attempt to bend back out the speaker grilles ? Is this an easy radio to do an internal clean ?

Thanks :breakdance:
 
monchito

monchito

Member (SA)
May 5, 2009
4,601
6
38
pythonville florida
hi u must remove the front case portion to get to the speakers :-) then u should see the metal tabs and there u should be able to pull the grill off ..btw can u post a pic of the box in question???? :-)
 
The Box of Boom

The Box of Boom

Member (SA)
Dec 18, 2011
333
0
16
47
Sydney/Australia/Earth
I can post a photo after christmas. It looks exatcly the same as the 3D80e I am pretty sure. I am a bit of a novice with opening up boxes - any links to tips on giving internal maintenance. i.e. where to spray deoxit etc.
 
Gluecifer

Gluecifer

Member (SA)
May 6, 2009
3,599
8
38
51
Belmont, Australia
Using some thin wire or something else hook shaped you can usually thread it through the speaker grill holes then around and back out. You can then pull the wire gently to pop the grills back out. A goog idea is to thread string through the holes, this eliminates the risk of scratching the paintwork on the grills.

Good luck!



Rock On.
 
R

RockE

Member (SA)
Apr 13, 2011
199
0
0
53
Australia
Gluecifer said:
Using some thin wire or something else hook shaped you can usually thread it through the speaker grill holes then around and back out. You can then pull the wire gently to pop the grills back out. A goog idea is to thread string through the holes, this eliminates the risk of scratching the paintwork on the grills.

Good luck!

Rock On.
Click to expand...
Glue is spot on, I've also used a small fish hook in the past with a pair of pliers to pull out dents in my 3D's
 
Status
Not open for further replies.
Top Bottom