need pics for deck 1 board

Status
Not open for further replies.
baddboybill

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
Working on mssi and need to see pics of where all wire go on the deck 1 board, especially lower motor side...When I got this someone had been in it soldering a resistor and I need to make sure nothing else was moved... Here is my pic from when I opened it up...Thanks



 
baddboybill

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
blu_fuz said:
Looks like my parts box conion has the same blown resistor :dunce:


[ Image ]
Click to expand...
Thanks joe, but I need it with all wires hooked up as the guy before me was soldering and I need to check to make sure wires in right spot. I'm having trouble with music search and never checked when I repaired in begging of year. This will be much appreciated. :thumbsup:
 
baddboybill

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
In order to view this board only back of box needs to come off. No tear down necessary. Please, I need someone with a conion or aka help in order to resolve this issue :sad:
 
baddboybill

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
Ok thanks to Joe (Blu_fuz) for a used deck board and Norm (Superduper) for helping me with measurement, I finally got Music Search working 100% :thumbsup: it ended up being the trim pot for sensitivity level being bad. I used the trim pot off the board I got from Joe and she's working great :yes: Thanks guys :smooch:
Bad trim pot........
 
Transistorized

Transistorized

Member (SA)
Jun 19, 2012
1,838
266
83
USA
I noticed 3 of these on the board. Can you tell me which one it was? My music search just keeps on going and doesn't stop so I may try adjusting or looking at this variable resistor. Is it the one that is off by itself? Thanks
 
baddboybill

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
I noticed 3 of these on the board. Can you tell me which one it was? My music search just keeps on going and doesn't stop so I may try adjusting or looking at this variable resistor. Is it the one that is off by itself? Thanks


VR301


Sent from my iPad using Tapatalk
 
Transistorized

Transistorized

Member (SA)
Jun 19, 2012
1,838
266
83
USA
Hey Guys. Im starting to think this was the way they are because my box is the same. It's two separate resistors joined together with solder in the middle. Every one of these Conions I have taken apart looks the exact same way.
 
Transistorized

Transistorized

Member (SA)
Jun 19, 2012
1,838
266
83
USA
baddboybill said:
VR301


Sent from my iPad using Tapatalk
Click to expand...
Thanks. Not sure if mine is bad also. Mine just keeps fast forwarding but will stop to play the tape if you press the MSSI button while its scanning it just wont stop between songs. Oh well. Tried turning this VR301 but didn't seem to help unless I'm just not familiar with the process.
 
baddboybill

baddboybill

Member (SA)
Jul 14, 2009
11,091
84
48
55
Hudson Florida
Thanks. Not sure if mine is bad also. Mine just keeps fast forwarding but will stop to play the tape if you press the MSSI button while its scanning it just wont stop between songs. Oh well. Tried turning this VR301 but didn't seem to help unless I'm just not familiar with the process.


More than likely the pot is bad and needs to be replaced :yes:


Sent from my iPad using Tapatalk
 
Status
Not open for further replies.
Top Bottom