Keep on rolling - PHILIPS roller

Just did a rebelting on a roller series 1



taking off 6 screws, the tuning knob and the function slider



open rrrroller



take off the left screw of the function slider (right one can stay)
Only for lifting up a bit



take off the 2 screws of the circuitboard and take care of the clip (red)
Not take out, only lift up a bit



Take off the screw of the recordslider and the one of the wheelplate.
So you can lift it up a bit and take off the old belt and implant the new one.
Ok, looks easier to implant the belt as it is, i nearly broke my fingers to get it under the plate on the left side



but finally it rrrrrolls again



Happy again

great job

Cool to see the guts of the roller too. Somehow love the series one more then next .
BTW - what happened to your finger

stormsven said:

BTW - what happened to your finger

Click to expand...

It was not the roller!

I found a nice BATAVUS "Flying Dutchman" on dump.
Now i know, there is somethiing wrong with the chain.....