Discolite bulb specifications

I just checked out my Discolite a little closer and found the two cable-compartments on the back that have thre wires to the bulbs in them
Seems nobody was in there since the 80s .

Anyway, it says clearly in there to not replace the bulbs with anything but
6V 100mA bulbs
I think quite a few of you have been looking for those specifications so I hope I helped you with this.

Especially I wish ViennaSound good luck fixing his discolite

[ebay]150261089497[/ebay] Woosh, there you go. Replacements for your Discolite

max - thanks

redbenjoe said:

max - thanks

Click to expand...

Idk if this mybe reads a little sarcastic . Where the specifications known preciously to this ?
Sorry for selling the info as "new" then .

max --those specs were new to me --
so far --all 4 of those lamps have been working well on my box-
so --i never needed to check them out

redbenjoe said:

max --those specs were new to me --
so far --all 4 of those lamps have been working well on my box-
so --i never needed to check them out

Click to expand...

Ahh, okay . Well, i now at least viennaSound needs those specs since he has 3 very bright bulbs and my guess is they are too strong and their heat might cause fire (at least that is what the sticker in my discolite says)
So even if this is only relevant to one member, it stands here for future discolite owners who need help

mmcodomino said:

redbenjoe said:

max --those specs were new to me --
so far --all 4 of those lamps have been working well on my box-
so --i never needed to check them out

Click to expand...

Ahh, okay . Well, i now at least viennaSound needs those specs since he has 3 very bright bulbs and my guess is they are too strong and their heat might cause fire (at least that is what the sticker in my discolite says)
So even if this is only relevant to one member, it stands here for future discolite owners who need help

Click to expand...

Thanks. Its good info

yeah, great, this helps!

thanks, i will get now the lamps in my radioworker shop

Thanks for the INFO!